Standard drive shaft with connection fork and overload clutch
Product advantages
The W series PTO drive shaft offers tried-and-tested Walterscheid technology and is perfectly designed to suit all application areas. The excellent benefits of this Walterscheid PTO drive shaft is a long service life, ease of use, and great safety properties. For decades, Walterscheid has been a guarantee of the highest quality. The W series are optimally dimensioned for drivetrain tasks, from simple to complex ones. It impresses users with its robust design and high reliability for daily use. Another advantage: All of the components in the PTO drive shaft W series can be replaced really easily to increase ease of use or if spare parts are needed.
The scope of delivery includes a complete drive shaft size W2500 with connection fork (profile 1 3/8" (6)), overrunning clutch FK96/4R, guard, retaining chain(s), operating and assembly instructions incl. declaration of conformity.
All components are designed specifically for the device and performance and it is not allowed to exchange for components other than those prescribed by Walterscheid. Damaged or missing parts can only replace with original Walterscheid parts and retrofit them in accordance with regulations and after consultation with Walterscheid.
The assignment, assembly and use of this model requires a detailed preliminary examination by qualified personnel. It is imperative to check the existing facilities and all of the machinery and equipment for their suitability for attachment. In particular, the characteristic values (e.g. vertical and pulling loads or torques) and the geometries (e.g. dimensions, screw hole patterns, free spaces) must be observed. Depending on the existing equipment of the machine, this can result in the use or purchase of additional components. The content of operating instructions must be observed.
The standard design is suitable for the use of drive shafts with parallel axes. Depending on the application, it is recommended that a simple joint can be operated up to an angle of max. 25°. A constant angle during continuous operation of max. 15° should not be exceeded.
- Type
- W
- Size
- 2500
- Shaft length (Lz)
- 1010
- Item no. attachment WH-A
- 123527
- Item no. attachment WH-I
- 362428
- Torque of clutch in daNm
- 210
- Rotation speed max. RPM
- 1000 UPM
- Set position of clutch
- II
- Form attachment WH-A
- KP1 3/4
- Form attachment WH-I
- KP1 3/8
- Cone type WH-I
- RP7
- Outer profile length
- 845
- PR-I
- S4
- Schutzrohrlänge-I
- 770.00
- Protective colour
- Yellow
- KZ Anschl.-WH-A
- K-CC
- Length of guard tube (outer)
- 770
- PR-Bef.
- AA
- Cone Type WH-A
- RP6
- Drehzahl max.
- 1000 UPM
- Einstelllage
- II
- KZ Anschl.-WH-I
- ASG
- Inner profile length
- 865
- W-Länge
- 1010.00
- SNR Anschl.-WH-A
- 123527
- SNR Anschl.-WH-I
- 362428
- Chain WH-I
- K
- PR-Länge-A
- 845.00
- PR-A
- S5
- Form Anschl.-WH-I
- KP1 3/8
- Attachment type of profile
- AA
- Kuppl./Freilauf
- FK96/4R
- Chain WH-A
- K
- Nipple shape/position
- LB LB
- Schutzrohrlänge-A
- 770.00
- MD in daNm
- 210.00
- Nipple form / position I/A
- LB LB
- SNR cone WH-A
- 106118
- Length of guard tube (inner)
- 770
- PR-Länge-I
- 865.00
- SNR cone WH-I
- 199125
- Form Anschl.-WH-A
- KP1 3/4
- Cross seal
- STANDARD
- Clutch / One-way type
- FK96/4R
- Abbreviation attachment WH-A
- K-CC
- Abbreviation attachment WH-I
- ASG
- Profile tube - outer type
- S5
- Profile tube - inner type
- S4
- Guard type
- SD25
Deutsch
English
Français
