Walterscheid® PowerDrive PTO Driveshaft with one-sided wide angle joint and clutch PWE 580 - 1605445

Product number: 1605445

PWE 580 SPGF25Z 1710 K64/22R 235FIX3683322 5911743 S4GA/S5


Similar to illustration. Use products only for their intended use. Content is subject to change without notice. Further sizes and combinations may be available: contact us for availability.
Cross references, designation of type by vehicle manufacturers or competitors are for guidance only.
Check that the part is correct for the application before fitting.


The listing of this OEM article is for the purpose of identification only. It is not intended as a spare part until further notice!

All components are designed specifically for the device and performance and it is not allowed to exchange for components other than those prescribed by Walterscheid. Damaged or missing parts can only replace with original Walterscheid parts and retrofit them in accordance with regulations and after consultation with Walterscheid.
The assignment, assembly and use of this model requires a detailed preliminary examination by qualified personnel. It is imperative to check the existing facilities and all of the machinery and equipment for their suitability for attachment. In particular, the characteristic values (e.g. vertical and pulling loads or torques) and the geometries (e.g. dimensions, screw hole patterns, free spaces) must be observed. Depending on the existing equipment of the machine, this can result in the use or purchase of additional components. The content of operating instructions must be observed.
Type
PWE
Size
580
Shaft length (Lz)
1710
Item no. attachment WH-A
605098
Item no. attachment WH-I
600472
Torque of clutch in daNm
235
Rotation speed max. RPM
540 UPM
Set position of clutch
FIX
Form attachment WH-A
KP1 3/8
Form attachment WH-I
KP1 3/8
PR-A
S5
PR-Länge-A
1420.00
Einstelllage
FIX
MD in daNm
235.00
Kuppl./Freilauf
K64/22R
Attachment type of profile
AA
Inner profile length
1400
PR-Länge-I
1400.00
Form Anschl.-WH-A
KP1 3/8
Drehzahl max.
540 UPM
SNR Anschl.-WH-I
600472
Cone Type WH-A
VT
Schutzrohrlänge-A
1270.00
Nipple shape/position
LZ LB
Schutzrohrlänge-I
1125.00
KZ Anschl.-WH-A
K-CC
W-Länge
1710.00
SNR cone WH-I
129929
PR-Bef.
AA
Protective colour
Yellow
SNR Anschl.-WH-A
605098
Outer profile length
1420
Form Anschl.-WH-I
KP1 3/8
SNR cone WH-A
120608
Cone type WH-I
WW80
Nipple form / position I/A
LZ LB
Length of guard tube (inner)
1125
Length of guard tube (outer)
1270
PR-I
S4GA
KZ Anschl.-WH-I
QSG
Cross seal
P-DICHTUNG
Clutch / One-way type
K64/22R
Abbreviation attachment WH-A
K-CC
Abbreviation attachment WH-I
QSG
Profile tube - outer type
S5
Profile tube - inner type
S4GA
Guard type
SPGF25Z

ass: 11 sim: 0 croo: 0