Standard drive shaft with connecting fork, overload clutch and wide-angle joint on one side
Product advantages
The W series PTO drive shaft offers tried-and-tested Walterscheid technology and is perfectly designed to suit all application areas. The excellent benefits of this Walterscheid PTO drive shaft is a long service life, ease of use, and great safety properties. For decades, Walterscheid has been a guarantee of the highest quality. The W series are optimally dimensioned for drivetrain tasks, from simple to complex ones. It impresses users with its robust design and high reliability for daily use. Another advantage: All of the components in the PTO drive shaft W series can be replaced really easily to increase ease of use or if spare parts are needed.
The scope of delivery includes a complete drive shaft size WWE2380 with connection fork (profile 1 3/8" (6)), overrunning clutch F5/1R, guard, retaining chain(s), operating and assembly instructions incl. declaration of conformity.
All components are designed specifically for the device and performance and it is not allowed to exchange for components other than those prescribed by Walterscheid. Damaged or missing parts can only replace with original Walterscheid parts and retrofit them in accordance with regulations and after consultation with Walterscheid.
The assignment, assembly and use of this model requires a detailed preliminary examination by qualified personnel. It is imperative to check the existing facilities and all of the machinery and equipment for their suitability for attachment. In particular, the characteristic values (e.g. vertical and pulling loads or torques) and the geometries (e.g. dimensions, screw hole patterns, free spaces) must be observed. Depending on the existing equipment of the machine, this can result in the use or purchase of additional components. The content of operating instructions must be observed.
This design is suitable for non-axis-parallel use when the simple universal joint is mainly in the extended position and the wide-angle joint is to be angled. Depending on the application, it is recommended that the wide angle joint can be operated up to a maximum angle of 80°. A constant angle during continuous operation of max. 20° should not be exceeded.
- Type
- WWE
- Size
- 2380
- Shaft length (Lz)
- 1010
- Item no. attachment WH-A
- 366750
- Item no. attachment WH-I
- 134548
- Torque of clutch in daNm
- 0
- Rotation speed max. RPM
- 540 UPM
- Form attachment WH-A
- KP1 3/8
- Form attachment WH-I
- KP1 3/8
- Chain WH-A
- K
- MD in daNm
- 0.00
- SNR cone WH-A
- 199181
- SNR Anschl.-WH-A
- 366750
- Kuppl./Freilauf
- F5/1R
- Nipple form / position I/A
- LZ LB
- KZ Anschl.-WH-A
- F-ZV
- Inner profile length
- 790
- W-Länge
- 1010.00
- Drehzahl max.
- 540 UPM
- Length of guard tube (outer)
- 725
- Protective colour
- Yellow
- Cone Type WH-A
- RP5
- Schutzrohrlänge-A
- 725.00
- PR-Länge-A
- 780.00
- PR-A
- 1G
- Chain
- K
- Chain WH-I
- K
- Form Anschl.-WH-A
- KP1 3/8
- PR-Länge-I
- 790.00
- SNR Anschl.-WH-I
- 134548
- Attachment type of profile
- AA
- PR-Bef.
- AA
- Form Anschl.-WH-I
- KP1 3/8
- Schutzrohrlänge-I
- 725.00
- PR-I
- 0VGA
- Cone type WH-I
- WW80
- SNR cone WH-I
- 134400
- KZ Anschl.-WH-I
- ASGE
- Length of guard tube (inner)
- 725
- Nipple shape/position
- LZ LB
- Outer profile length
- 780
- Cross seal
- STANDARD
- Clutch / One-way type
- F5/1R
- Abbreviation attachment WH-A
- F-ZV
- Abbreviation attachment WH-I
- ASGE
- Profile tube - outer type
- 1G
- Profile tube - inner type
- 0VGA
- Guard type
- SDF15
Deutsch
English
Français
