Walterscheid® PTO Driveshaft with one-sided wide angle joint WWE 2380 - 1691988

Product number: 1691988

WWE 2380 SDF15 1410 2183830 211000 0VGA/1G


Similar to illustration. Use products only for their intended use. Content is subject to change without notice. Further sizes and combinations may be available: contact us for availability.
Cross references, designation of type by vehicle manufacturers or competitors are for guidance only.
Check that the part is correct for the application before fitting.


Discontinued Model. Limited availability. Successor product: 1610122

Product advantages

The Walterscheid diamond has been a guarantee of quality and safety for decades.
You can rely on their good reputation. It meets your requirements.
All components are designed specifically for the device and performance and it is not allowed to exchange for components other than those prescribed by Walterscheid. Damaged or missing parts can only replace with original Walterscheid parts and retrofit them in accordance with regulations and after consultation with Walterscheid.
The assignment, assembly and use of this model requires a detailed preliminary examination by qualified personnel. It is imperative to check the existing facilities and all of the machinery and equipment for their suitability for attachment. In particular, the characteristic values (e.g. vertical and pulling loads or torques) and the geometries (e.g. dimensions, screw hole patterns, free spaces) must be observed. Depending on the existing equipment of the machine, this can result in the use or purchase of additional components. The content of operating instructions must be observed.
Download
Type
WWE
Size
2380
Shaft length (Lz)
1410
Item no. attachment WH-A
41378
Item no. attachment WH-I
134548
Torque of clutch in daNm
0
Rotation speed max. RPM
540 UPM
Form attachment WH-A
KP1 3/8
Form attachment WH-I
KP1 3/8
Inner profile length
1180
SNR cone WH-I
134400
SNR cone WH-A
198103
Cone Type WH-A
VT FT
Cone type WH-I
WW80
Chain
K
Outer profile length
1180
Protective colour
Yellow
Nipple form / position I/A
LL LB
Attachment type of profile
AA
Length of guard tube (inner)
1120
Length of guard tube (outer)
1125
Cross seal
STANDARD
Abbreviation attachment WH-A
AG
Abbreviation attachment WH-I
ASGE
Profile tube - outer type
1G
Profile tube - inner type
0VGA
Guard type
SDF15

ass: 4 sim: 0 croo: 0