SCH25Z J2220 8525615 K B25/50 Walterscheid® Walterscheid® Safety guard half inner SCH 25Z - 1120683

Walterscheid® Safety guard half inner SCH 25Z - 1120683

Product number: 1120683

SCH25Z J2220 8525615 K B25/50


Similar to illustration. Use products only for their intended use. Content is subject to change without notice. Further sizes and combinations may be available: contact us for availability.
Cross references, designation of type by vehicle manufacturers or competitors are for guidance only.
Check that the part is correct for the application before fitting.


Inner safety guard half for standard wide-angle drive shaft

Product advantages

The SD guard complies with worldwide safety regulations and takes into account additional radial loads during test requirements according to ISO 5674 and France Decree 81293. A guard funnel with support ring and retaining chains prevents the guard tubes from spinning. Due to the special arrangement of the guard, the joint is fully protected in all angular positions. Even with large angulations, no contact with the rotating joint occurs.
The scope of delivery includes a complete Walterscheid protective half consisting of 1x protective tube half, 1x protective funnel, 1x sliding ring 25, 1x sliding ring 25Z, 1x screw for protective funnel and 1x retaining chain.
Type
SCH
Size
25Z
Manufacturer
Walterscheid
KPL/TKPL
KPL
Protective colour
GELB
Langl.o.Bohr.-/Abstände
BOHR.25/50
Rohrlänge
2220.00
Schutzgröße
25Z
Chain
K400
Trichtertyp
VTFT
Trichter-SNR
156183
J/A
J
Drawing
85.265
Guard type
SCH
ass: 0 sim: 0 croo: 0
Comer Industries Corporation Logo

© 2026 - Walterscheid Productfinder – v4.8.2b   | Walterscheid GmbH | Walterscheid GmbH | We reserve the right to make design changes. Only use products for the intended purpose. We only accept responsibility for consistent quality. Reprints whether in whole or in part are only allowed with the written permission of Walterscheid GmbH.

Notify me when available

You will be notified as soon as the article is available again.