PGH30SW J1000 863468 K Walterscheid® Walterscheid® Safety guard half inner PGH 30 - 1116993

Walterscheid® Safety guard half inner PGH 30 - 1116993

Product number: 1116993

PGH30SW J1000 863468 K


Similar to illustration. Use products only for their intended use. Content is subject to change without notice. Further sizes and combinations may be available: contact us for availability.
Cross references, designation of type by vehicle manufacturers or competitors are for guidance only.
Check that the part is correct for the application before fitting.


Inner safety guard half for PowerDrive drive shaft size P600 | P700

Product advantages

The PowerDrive driveshaft with single joints can be combined with a full guard. It eliminates the need for the guard pot on the equipment side and both retaining chains, and the dangerous rotation of the complete guard is prevented. For easy handling of the PowerDrive PTO shaft, the guard funnels can be easily unlocked and pushed back. The resulting free space makes it much easier to connect and disconnect the PTO shafts and to maintain the joints and guard bearings.
The scope of delivery includes a complete Walterscheid protective half consisting of 1x protective tube half, 1x protective funnel, 1x sliding ring and 1x retaining chain.
Type
PGH
Size
30
Manufacturer
Walterscheid
Rohrlänge
1000.00
Chain
K400
Schutzgröße
30
Trichter-SNR
123768
J/A
J
Trichtertyp
RP8
Protective colour
SCHWARZ
KPL/TKPL
KPL
Guard type
PGH
ass: 0 sim: 0 croo: 0
Comer Industries Corporation Logo

© 2026 - Walterscheid Productfinder – v4.8.2b   | Walterscheid GmbH | Walterscheid GmbH | We reserve the right to make design changes. Only use products for the intended purpose. We only accept responsibility for consistent quality. Reprints whether in whole or in part are only allowed with the written permission of Walterscheid GmbH.

Notify me when available

You will be notified as soon as the article is available again.