Walterscheid® Stabilizer body HGST - 1208938

Product number: 1208938

STABILISATOR-GRUNDK HGST L325 HUB22 KH30-50 LA.R1004

Similar to illustration. Use products only for their intended use. Content is subject to change without notice. Further sizes and combinations may be available: contact us for availability.
Cross references, designation of type by vehicle manufacturers or competitors are for guidance only.
Check that the part is correct for the application before fitting.

Hydraulic body for Walterscheid stabiliser HGST

Product advantages

Automatic switching between rigid and floating position when raising and lowering the power lift
Permanent rigid or floating position possible at any time
Convenient control from the driver’s seat

The scope of delivery includes 1x stabiliser body. Control set (order number: 1201777), shuttle valve (order number: 1202997) and spacers (order number: 1200647) are not included in the scope of delivery and may have to be purchased separately.

All components are designed specifically for the device and performance and it is not allowed to exchange for components other than those prescribed by Walterscheid. Damaged or missing parts can only replace with original Walterscheid parts and retrofit them in accordance with regulations and after consultation with Walterscheid.
The assignment, assembly and use of this model requires a detailed preliminary examination by qualified personnel. It is imperative to check the existing facilities and all of the machinery and equipment for their suitability for attachment. In particular, the characteristic values (e.g. vertical and pulling loads or torques) and the geometries (e.g. dimensions, screw hole patterns, free spaces) must be observed. Depending on the existing equipment of the machine, this can result in the use or purchase of additional components. The content of operating instructions must be observed.

Designed for mechanical lower links