Walterscheid® Adapter AD8300JD-RT – 8005441

Product number: 8005441

185x210x55 mm-160x100M20HD106x78D=31/21 mm

Similar to illustration. Use products only for their intended use. Content is subject to change without notice. Further sizes and combinations may be available: contact us for availability.
Cross references, designation of type by vehicle manufacturers or competitors are for guidance only.
Check that the part is correct for the application before fitting.

usable for a big range of couplings type flange

The scope of delivery includes 1x Adapter AD8300JD-RT with single homologation.

The necessary four mounting screws M20x220 DIN912 10.9 (order number: 8005442) as well as the four mounting screws M20x50 DIN933 10.9 (order number: 8004805) are not included in the scope of delivery and must be ordered separately if required.

Instructions for certificates: Installation of coupling parts must be checked and approved by an recognized expert
according to section 4 of Annex VIIIb to the StVZO based at the information of delivered certificates

All components are designed specifically for the device and performance and it is not allowed to exchange for components other than those prescribed by Walterscheid. Damaged or missing parts can only replace with original Walterscheid parts and retrofit them in accordance with regulations and after consultation with Walterscheid.
The assignment, assembly and use of this model requires a detailed preliminary examination by qualified personnel. It is imperative to check the existing facilities and all of the machinery and equipment for their suitability for attachment. In particular, the characteristic values (e.g. vertical and pulling loads or torques) and the geometries (e.g. dimensions, screw hole patterns, free spaces) must be observed. Depending on the existing equipment of the machine, this can result in the use or purchase of additional components. The content of operating instructions must be observed.