Original Walterscheid spare part
Product advantages
The Walterscheid QS lock is a further development of the well-known pull lock. It is available for all building sites. Since the QS fork can be pre-centered on the PTO with the last lock, you have both hands free to push it on. It snaps into place and is clearly audible.
The scope of delivery includes 1x Wide-Angle connecting yoke series W with slide collar (automatic).
All components are designed specifically for the device and performance and it is not allowed to exchange for components other than those prescribed by Walterscheid. Damaged or missing parts can only replace with original Walterscheid parts and retrofit them in accordance with regulations and after consultation with Walterscheid.
The assignment, assembly and use of this model requires a detailed preliminary examination by qualified personnel. It is imperative to check the existing facilities and all of the machinery and equipment for their suitability for attachment. In particular, the characteristic values (e.g. vertical and pulling loads or torques) and the geometries (e.g. dimensions, screw hole patterns, free spaces) must be observed. Depending on the existing equipment of the machine, this can result in the use or purchase of additional components. The content of operating instructions must be observed.
- Type
- QSG
- Size
- 2280
- Type
- QSG
- B (mm)
- 70
- Manufacturer
- Walterscheid
- d (mm)
- 24
- A-Profile
- 1 ⅜‘‘ (21)
- L (mm)
- 116
- D5 (mm)
- 22
- Arretierung/Bohrung
- QS-B
- Distance from drilling end
- 38
- Abstand Bohr.-Mitte
- 0.00
- Profile length
- 76.00
- Länge Augenb.-Ende
- 116.00
- Ø ü.Nut
- 0.00
- Werkstoff
- SIEHE STL
- Rohling-/Gabel-SNR
- 365791
- Anschluss-PR
- ZNP1 3/8-21
- Drawing
- 20.83.812
Deutsch
English
Français
